manualshive.com logo in svg

Cisco IE 4000, Software Configuration Manual

The Cisco IE 4000 is a powerful industrial Ethernet switch designed for seamless network connectivity in rugged environments. Experience optimal performance and reliability with its advanced features. Easily access the comprehensive user manual for this product, available for free download exclusively on our manualshive.com.

Share
Download
background image

401

   

Configuring DHCP

Monitoring and Maintaining DHCP

Monitoring and Maintaining DHCP

Configuration Examples for Configuring DHCP

Enabling DHCP Server Port-Based Address Allocation: Examples

In this example, a subscriber identifier is automatically generated, and the DHCP server ignores any client identifier fields 
in the DHCP messages and uses the subscriber identifier instead. The subscriber identifier is based on the short name 
of the interface and the client preassigned IP address 10.1.1.7.

switch# 

show running config

Building configuration...

Current configuration : 4899 bytes

!

version 12.2

!

4.

address

 ip-address 

client-id

 string 

[

ascii

]

Reserves an IP address for a DHCP client identified 
by the interface name.

string

—Can be an ASCII value or a hexadecimal value.

5.

reserved-only

(Optional) Uses only reserved addresses in the DHCP 
address pool. The default is to not restrict pool 
addresses.

6.

end

Returns to privileged EXEC mode.

Command

Purpose

Command

Purpose

show interface

 interface id

Displays the status and configuration of a specific interface.

show ip dhcp pool

Displays the DHCP address pools.

show ip dhcp binding 

Displays address bindings on the Cisco IOS DHCP server.

ip dhcp snooping database timeout 

seconds

Specifies (in seconds) how long to wait for the database 
transfer process to finish before stopping. 

ip dhcp snooping database write-delay 

seconds

Specifies (in seconds) the duration for which the transfer 
should be delayed after the binding database changes. 

clear ip dhcp snooping database statistics 

Clears the DHCP snooping binding database agent statistics. 

renew ip dhcp snooping database

Renews the DHCP snooping binding database. 

show ip dhcp snooping database

 [

detail

]

Displays the status and statistics of the DHCP snooping 
binding database agent.

show ip dhcp snooping

Displays the DHCP snooping configuration for a switch

show ip dhcp snooping binding

Displays only the dynamically configured bindings in the DHCP 
snooping binding database, also referred to as a binding table.

show ip dhcp snooping database

Displays the DHCP snooping binding database status and 
statistics.

show ip dhcp pool

Verifies DHCP pool configuration.

copy running-config startup-config

Saves your entries in the configuration file.

Summary of Contents for IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IE 4000

Watchguard Firebox SOHO 6 Wireless Instructions Manual preview
Firebox SOHO 6 Wireless
Brand: Watchguard Pages: 8
MicroNet BroadLink SP3353 Installation Manual preview
BroadLink SP3353
Brand: MicroNet Pages: 66
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Brand: Riverbed Pages: 38
NETGEAR FS605 v3 Installation Manual preview
FS605 v3
Brand: NETGEAR Pages: 84
TP-Link Archer MR500 User Manual preview
Archer MR500
Brand: TP-Link Pages: 110
IBM 8677 - BladeCenter Rack-mountable - Power Supply Planning And Installation Manual preview
8677 - BladeCenter Rack-mountable - Power Supply
Brand: IBM Pages: 126
Maipu MP2900-04-AC Installation Manual preview
MP2900-04-AC
Brand: Maipu Pages: 80
PairGain PG-Flex FLC-704 Manual preview
PG-Flex FLC-704
Brand: PairGain Pages: 20
Paradyne JetFusion 2100 Series User Manual preview
JetFusion 2100 Series
Brand: Paradyne Pages: 296
ivideon Bridge B1610 Quick Start Manual preview
Bridge B1610
Brand: ivideon Pages: 11
Lantronix WP2002000-01 User Manual preview
WP2002000-01
Brand: Lantronix Pages: 75
Teldat G1N Installation Manual preview
G1N
Brand: Teldat Pages: 23
Ubiquiti EdgeRouter X Quick Start Manual preview
EdgeRouter X
Brand: Ubiquiti Pages: 20
Vivotek TB5328 SERIES User Manual preview
TB5328 SERIES
Brand: Vivotek Pages: 317
N-Tron 304TX-N Specifications preview
304TX-N
Brand: N-Tron Pages: 2
EINHELL TC-RO 850 Original Operating Instructions preview
TC-RO 850
Brand: EINHELL Pages: 32
Me VS-M1 Instructions Manual preview
VS-M1
Brand: Me Pages: 28
Hamlet HRDSL108W Quick Installation Manual preview
HRDSL108W
Brand: Hamlet Pages: 6

Brands by name

Popular brands

Load more brands