manualshive.com logo in svg

Cisco IE 4000, Software Configuration Manual

The Cisco IE 4000 is a powerful industrial Ethernet switch designed for seamless network connectivity in rugged environments. Experience optimal performance and reliability with its advanced features. Easily access the comprehensive user manual for this product, available for free download exclusively on our manualshive.com.

Share
Download
background image

297

   

Configuring VTP

Information About Configuring VTP

VTP Modes

VTP Mode Guidelines

For VTP version 1 and version 2, if extended-range VLANs are configured on the switch, you cannot change VTP 
mode to client or server. You receive an error message, and the configuration is not allowed. VTP version 1 and 
version 2 do not propagate configuration information for extended range VLANs (VLANs 1006 to 4096). You must 
manually configure these VLANs on each device. 

Note: 

For VTP version 1 and 2, before you create extended-range VLANs (VLAN IDs 1006 to 4096), you must set 

VTP mode to transparent by using the 

vtp mode transparent 

global configuration command. Save this configuration 

to the startup configuration so that the switch starts in VTP transparent mode. Otherwise, you lose the 
extended-range VLAN configuration if the switch resets and boots up in VTP server mode (the default).

VTP version 3 supports extended-range VLANs. If extended VLANs are configured, you cannot convert from VTP 
version 3 to VTP version 2.

If you configure the switch for VTP client mode, the switch does not create the VLAN database file (vlan.dat). If the 
switch is then powered off, it resets the VTP configuration to the default. To keep the VTP configuration with VTP 
client mode after the switch restarts, you must first configure the VTP domain name before the VTP mode.

Table 36

VTP Modes

VTP Mode

Description

VTP server

In VTP server mode, you can create, modify, and delete VLANs, and specify other configuration parameters 
(such as the VTP version) for the entire VTP domain. VTP servers advertise their VLAN configurations to 
other switches in the same VTP domain and synchronize their VLAN configurations with other switches 
based on advertisements received over trunk links.

VTP server is the default mode.

Note: 

In VTP server mode, VLAN configurations are saved in NVRAM. If the switch detects a failure while 

writing a configuration to NVRAM, VTP mode automatically changes from server mode to client mode. If 
this happens, the switch cannot be returned to VTP server mode until the NVRAM is functioning.

VTP client

A VTP client behaves like a VTP server and transmits and receives VTP updates on its trunks, but you 
cannot create, change, or delete VLANs on a VTP client. VLANs are configured on another switch in the 
domain that is in server mode.

In VTP versions 1 and 2, in VTP client mode, VLAN configurations are not saved in NVRAM. In VTP version 
3, VLAN configurations are saved in NVRAM in client mode.

VTP transparent

VTP transparent switches do not participate in VTP. A VTP transparent switch does not advertise its VLAN 
configuration and does not synchronize its VLAN configuration based on received advertisements. 
However, in VTP version 2 or version 3, transparent switches do forward VTP advertisements that they 
receive from other switches through their trunk interfaces. You can create, modify, and delete VLANs on a 
switch in VTP transparent mode. 

In VTP versions 1 and 2, the switch must be in VTP transparent mode when you create extended-range 
VLANs. VTP version 3 also supports creating extended-range VLANs in client or server mode. 

When the switch is in VTP transparent mode, the VTP and VLAN configurations are saved in NVRAM, but 
they are not advertised to other switches. In this mode, VTP mode and domain name are saved in the 
switch running configuration, and you can save this information in the switch startup configuration file by 
using the 

copy running-config startup-config

 privileged EXEC command. 

VTP off

A switch in VTP off mode functions in the same manner as a VTP transparent switch, except that it does 
not forward VTP advertisements on trunks.

Summary of Contents for IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IE 4000

Eaton Network Card-MS User Manual preview
Network Card-MS
Brand: Eaton Pages: 89
Garland P1GCCAS Installation Manual preview
P1GCCAS
Brand: Garland Pages: 4
EnGenius ETR9360 Quick Start Manual preview
ETR9360
Brand: EnGenius Pages: 3
APARIAN DH485 Quick Start Manuals preview
DH485
Brand: APARIAN Pages: 2
VCS VideoJet 100 Manual preview
VideoJet 100
Brand: VCS Pages: 118
BWI PCI Duo/TP User Manual preview
PCI Duo/TP
Brand: BWI Pages: 5
TP-Link L-R480T+ User Manual preview
L-R480T+
Brand: TP-Link Pages: 131
Ubiquiti UniFi AP PRO Quick Start Manual preview
UniFi AP PRO
Brand: Ubiquiti Pages: 20
Milesight Pro UR32 Quick Start Manual preview
Pro UR32
Brand: Milesight Pages: 15
TRENDnet TE100S8P - Fast Ethernet Switch (Spanish) Quick Installation Manual preview
TE100S8P - Fast Ethernet Switch
Brand: TRENDnet Pages: 11
Broadband Products Xtreme Networked Boat User Manual preview
Xtreme Networked Boat
Brand: Broadband Products Pages: 16
Infoblox ND-2200 Installation Manual preview
ND-2200
Brand: Infoblox Pages: 44
Me VS-M1 Instructions Manual preview
VS-M1
Brand: Me Pages: 28
Watchguard Firebox T85-PoE Hardware Manual preview
Firebox T85-PoE
Brand: Watchguard Pages: 27
Advantage Boost Box Setup Manual preview
Boost Box
Brand: Advantage Pages: 4
Ringdale Thin Twinax Terminal LM-6488 Installation And Setup Manual preview
Thin Twinax Terminal LM-6488
Brand: Ringdale Pages: 15
D-Link DIR-878 User Manual preview
DIR-878
Brand: D-Link Pages: 191
ELC dmXLAN node6x User Manual preview
dmXLAN node6x
Brand: ELC Pages: 12

Brands by name

Popular brands

Load more brands