manualshive.com logo in svg

Cisco IE 4000, Software Configuration Manual

The Cisco IE 4000 is a powerful industrial Ethernet switch designed for seamless network connectivity in rugged environments. Experience optimal performance and reliability with its advanced features. Easily access the comprehensive user manual for this product, available for free download exclusively on our manualshive.com.

Share
Download
background image

657

Cisco Systems, Inc.

www.cisco.com

 

Configuring IPv6 Host Functions

This chapter describes how to configure IPv6 host functions on the switch.

Prerequisites Configuring IPv6 Host Functions

To enable dual-stack environments (supporting both IPv4 and IPv6), you must configure the switch to use the a dual 
IPv4 and IPv6 switch database management (SDM) template. See 

Dual IPv4 and IPv6 Protocol Stacks, page 660

.

Information About Configuring IPv6 Host Functions

IPv6 

IPv4 users can move to IPv6 and receive services such as end-to-end security, quality of service (QoS), and globally 
unique addresses. The IPv6 address space reduces the need for private addresses and Network Address Translation 
(NAT) processing by border routers at network edges.

For information about how Cisco Systems implements IPv6, go to this URL:

http://www.cisco.com/en/US/products/ps6553/products_ios_technology_home.html

For information about IPv6 and other features in this chapter

See the 

Cisco IOS IPv6 Configuration Library

 at this URL:

http://www.cisco.com/en/US//docs/ios-xml/ios/ipv6/configuration/15-1mt/ipv6-15-1mt-book.html

This section describes IPv6 implementation on the switch. These sections are included:

IPv6 Addresses, page 657

Supported IPv6 Host Features, page 658

How to Configure IPv6 Hosting, page 662

IPv6 Addresses

The switch supports only IPv6 unicast addresses. It does not support site-local unicast addresses, anycast addresses, 
or multicast addresses.

The IPv6 128-bit addresses are represented as a series of eight 16-bit hexadecimal fields separated by colons in the 
format: n:n:n:n:n:n:n:n. This is an example of an IPv6 address:

2031:0000:130F:0000:0000:09C0:080F:130B

For easier implementation, leading zeros in each field are optional. This is the same address without leading zeros:

2031:0:130F:0:0:9C0:80F:130B

Summary of Contents for IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IE 4000

Paradyne 8820 Installation Manual preview
8820
Brand: Paradyne Pages: 86
D-Link Express Ethernetwork DI-704P Datasheet preview
Express Ethernetwork DI-704P
Brand: D-Link Pages: 2
Linksys WRT54G3G-AT Product Data preview
WRT54G3G-AT
Brand: Linksys Pages: 2
National Instruments NI PCIe-8255R Quick Start Manual preview
NI PCIe-8255R
Brand: National Instruments Pages: 16
National Instruments NI 9403 Operating Instructions Manual preview
NI 9403
Brand: National Instruments Pages: 23
Zhone 6211 Product Manual preview
6211
Brand: Zhone Pages: 7
Zhone 6211 Quick Installation Instructions preview
6211
Brand: Zhone Pages: 1
IBM TotalStorage SAN16M-R SAN Installation And Service Manual preview
TotalStorage SAN16M-R SAN
Brand: IBM Pages: 116
Google AC-1304 User Manual preview
AC-1304
Brand: Google Pages: 14
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
National Instruments FieldPoint cFP-RTD-122 Operating Instructions Manual preview
FieldPoint cFP-RTD-122
Brand: National Instruments Pages: 15
Cowfish Technologies VanConnect User Manual And Installation Manual preview
VanConnect
Brand: Cowfish Technologies Pages: 38
ZyXEL Communications P-335U Specifications preview
P-335U
Brand: ZyXEL Communications Pages: 2
IBM EtherLink XL User Manual preview
EtherLink XL
Brand: IBM Pages: 72
Zoom 4401F Specification Sheet preview
4401F
Brand: Zoom Pages: 2
NETGEAR MA 301 Reference Manual preview
MA 301
Brand: NETGEAR Pages: 20
Option Audio GlobeSurfer X-1 User Manual preview
GlobeSurfer X-1
Brand: Option Audio Pages: 30
Lanner ECA-4027 User Manual preview
ECA-4027
Brand: Lanner Pages: 99

Brands by name

Popular brands

Load more brands