manualshive.com logo in svg

Cisco IE 4000, Software Configuration Manual

The Cisco IE 4000 is a powerful industrial Ethernet switch designed for seamless network connectivity in rugged environments. Experience optimal performance and reliability with its advanced features. Easily access the comprehensive user manual for this product, available for free download exclusively on our manualshive.com.

Share
Download
background image

276

Configuring VLANs

 

VLANs

Ethernet VLANs

Each Ethernet VLAN in the VLAN database has a unique, 4-digit ID that can be a number from 1 to 1001. VLAN IDs 1002 
to 1005 are reserved for Token Ring and FDDI VLANs. To create a normal-range VLAN to be added to the VLAN database, 
assign a number and name to the VLAN. 

Note: 

With VTP version 1 and 2, if the switch is in VTP transparent mode, you can assign VLAN IDs greater than 1006, 

but they are not added to the VLAN database. See 

Creating an Extended-Range VLAN, page 285

.

For the list of default parameters that are assigned when you add a VLAN, see 

Normal-Range VLANs, page 273

.

VLAN Removal

When you delete a VLAN from a switch that is in VTP server mode, the VLAN is removed from the VLAN database for all 
switches in the VTP domain. When you delete a VLAN from a switch that is in VTP transparent mode, the VLAN is deleted 
only on that specific switch. 

You cannot delete the default VLANs for the different media types: Ethernet VLAN 1 and FDDI or Token Ring VLANs 1002 
to 1005.

Caution: 

When you delete a VLAN, any ports assigned to that VLAN become inactive. They remain associated with 

the VLAN (and thus inactive) until you assign them to a new VLAN.

Static-Access Ports for a VLAN

You can assign a static-access port to a VLAN without having VTP globally propagate VLAN configuration information by 
disabling VTP (VTP transparent mode). 

If you are assigning a port on a cluster member switch to a VLAN, first use the 

rcommand

 privileged EXEC command to 

log in to the cluster member switch.

Note: 

If you assign an interface to a VLAN that does not exist, the new VLAN is created. (See 

Creating or Modifying an 

Ethernet VLAN, page 284

.)

Table 34

Ethernet VLAN Defaults and Ranges

Parameter

Default

Range

VLAN ID

1

1 to 4096. 

Note: 

Extended-range VLANs (VLAN IDs 

1006 to 4096) are only saved in the VLAN 
database in VTP version 3.

VLAN name

VLANxxxx

, where 

xxxx

 represents four numeric 

digits (including leading zeros) equal to the VLAN ID 
number

No range

IEEE 802.10 SAID

100001 (100000 plus the VLAN ID)

1 to 4294967294

MTU size

1500

1500 to 18190

Translational bridge 1

0

0 to 1005

Translational bridge 2

0

0 to 1005

VLAN state

active

active, suspend

Remote SPAN

disabled

enabled, disabled

Summary of Contents for IE 4000











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for IE 4000

Ubiquiti M900 Quick Start Manual preview
M900
Brand: Ubiquiti Pages: 24
D-Link Verizon DSL-2750B Setup Manual preview
Verizon DSL-2750B
Brand: D-Link Pages: 6
D-Link DIR-857 Quick Installation Manual preview
DIR-857
Brand: D-Link Pages: 10
D-Link DSL-2740U Quick Installation Manual preview
DSL-2740U
Brand: D-Link Pages: 38
Panasonic BL-C20 Troubleshooting Manual preview
BL-C20
Brand: Panasonic Pages: 18
Ubiquiti ER-4 Quick Start Manuals preview
ER-4
Brand: Ubiquiti Pages: 22
Ubiquiti UniFi UAP-AC-LR Quick Start Manual preview
UniFi UAP-AC-LR
Brand: Ubiquiti Pages: 28
Linksys NSLU2 - Network Storage Link NAS Server Quick Installation Manual preview
NSLU2 - Network Storage Link NAS Server
Brand: Linksys Pages: 64
TRENDnet TEW-733GR User Manual preview
TEW-733GR
Brand: TRENDnet Pages: 62
Variscite VAR-EXT-CB105 Datasheet preview
VAR-EXT-CB105
Brand: Variscite Pages: 18
UfiSpace S9700-23D Hardware Installation Manual preview
S9700-23D
Brand: UfiSpace Pages: 32
IDT Tsi310TM User Manual preview
Tsi310TM
Brand: IDT Pages: 207
H3C LSWM12H2Q User Manual preview
LSWM12H2Q
Brand: H3C Pages: 9
B&B Electronics EIP308 Product Information preview
EIP308
Brand: B&B Electronics Pages: 2
Idis DR-1500 Series Quick Manual preview
DR-1500 Series
Brand: Idis Pages: 17
Planet IGS-5225-20T4C2X Quick Installation Manual preview
IGS-5225-20T4C2X
Brand: Planet Pages: 16
Tripp Lite N201-003-WH Specifications preview
N201-003-WH
Brand: Tripp Lite Pages: 2
Ceragon Fibe-Air IP-10G Installation Manual preview
Fibe-Air IP-10G
Brand: Ceragon Pages: 71

Brands by name

Popular brands

Load more brands