64
8.6
Flammüberwachung prüfen
1. Der Dampfautomat muss in Betrieb sein und
Dampf erzeugen.
2. Im Bild des Displays das Feld „System“
berühren, es erscheint das Bild:
3. Im Bild das Feld „Sicherheitseinrichtungen
prüfen“ berühren, es erscheint das Bild:
4. Im Bild das Feld „Flammüberwachung prüfen“
berühren.
5. Der Hauptschalter schaltet den
Dampfautomaten ab, im Bild des Displays
erscheint die Störanzeige „Feuerungsautomat
Störung“.
6. Im Bild des Displays die Störanzeige durch
Berührung im Feld „Störung quittieren“
zurücksetzen.
7. Den Hauptschalter am Dampfautomat zur
Steuerungsentriegelung einmal ganz nach
links drehen und wieder
einschalten
Wenn die Sicherheitsein -
richtungen nicht
ansprechen, Dampfautomat
außer Betrieb setzen und
autorisierten Kundendienst
anfordern!
8.6
Checking the flame monitoring
1. The steam generator has to be operating and
generating steam.
2. Touch the "System" field in the display screen.
The following screen is displayed:
3. Touch the "Check safety device" field in this
screen. The following screen is displayed:
4. Touch the "Check flame monitoring" field in
the screen.
5. The main switch switches the steam
generator off. The fault indicator "Automatic
furnace fault" is displayed.
6. Reset the fault indicator in the display screen
by touching the "Acknowledge fault" field.
7. To unlock the control system turn the main
switch at the steam generator once complet.
to the left and then switch it back on.
If the safety devices are not
triggered, shut the steam
generator down and call an
authorized customer service!
8
Prüfung Dampfanlage
8
Control steam plant
102
39