Canonzxczx MG5600 series Online Manual Download Page 874

Page: 874 / 910

5100

Cause

Printer error has occurred.

Action

Cancel printing and turn off the machine.

Then confirm the following.

• Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing

the print head holder from moving.

If any, remove the materials.

• Confirm that the ink tanks are installed properly.

Push an ink tank until it clicks into place.

After confirming the conditions above, turn on the machine again.

If the problem is not resolved, contact the service center.

Important

• When you clear the jammed paper or protective material that is preventing the print head holder from

moving, be careful not to touch the clear film (A) or the white belt (B).

If the paper or your hands touch these parts and blot or scratch them, the machine can be damaged.

874

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for MG5600 series















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MG5600 series

Reviews:

Related manuals for MG5600 series

Brands by name

Popular brands

Canonzxczx MG5600 series, Online Manual

Search results

Summary of Contents for MG5600 series

Reviews:

Related manuals for MG5600 series

Brands by name

Popular brands