Changing the Settings in the Admin Password Sheet
Note
• You cannot change the settings when using the access point mode.
1.
2. Select the printer in
Printers:
.
3. Select
Configuration...
from the
Settings
menu.
4. Click the
Admin Password
tab.
The
Admin Password
sheet is displayed.
For details on the
Admin Password
5. Change the settings or confirm.
To use an administrator password, select the
Use admin password
check box and enter a password.
Important
• The password should consist of alphanumeric characters and be no longer than 32 characters.
The password is case-sensitive. Do not forget the password you set.
If you forget the administrator password you specified, initialize the printer to revert the password
to the default setting.
6. Click
OK
.
A screen is displayed asking you for confirmation before the settings are sent to the printer. If you click
Yes
, the settings are sent to the printer and the
Transmitted Settings
screen is displayed.
266
Summary of Contents for MG5600 series
