After selecting the layout and press the
OK
button, you can select whether you use the preview screen. If
you select
ON
, the preview screen is displayed so that you can check the orientation.
Note
• If
Device memory is full. Cannot continue process.
appears on the LCD when scanning, set the print
quality to
Standard
, then try copying again. If the problem is not resolved, set the print quality to
Draft
and try copying again.
• This function can be used in combination with Two-sided copy.
If you use this function in combination, you can copy eight original pages on one sheet of paper. In this
case, four original pages are copied on each side of paper.
If you use this function in combination, select
2-sided
for
2-sidedPrintSetting
, then select the
orientation and the stapling side of print paper on the Print settings screen.
For details on two-sided copy function:
When checking the orientation:
When you are using the preview screen, the screen below is displayed before copying starts so that you
can check the orientation.
1.
Rotate
If you press the right
Function
button, the original rotates by 180 degrees.
2.
Rescan
If you press the left
Function
button, the original is rescanned.
Press the
OK
button to start scanning.
When scanning is finished:
The
Document setting
screen appears on the LCD after scanning each sheet of original.
514
Summary of Contents for MG5600 series
