Barco Event Master E2 Series, User Manual

Page: 18 / 584

R5905948 /12 Event Master Devices 18
Revision
Changes
11
• Changes initiated by software updates (version 6.2):
- Added Barcolink Ultra (4K) for SDI output on the Tri-Combo output card. Refer to
“ Tri-Combo Output Card ” , page 75.
- Increased the maximum number of Cues to 120. Refer to “ Cue Menu > Cue
Workspace area ” , page 242.
- Added instructions for creating, populating, and manipulating Super AUX
destinations. Refer to
“ Configuration Menu > Adjustment > Destination
Configuration ” , page 145 and “ Configuration Menu > Adjustment > Destination
Configuration > Adjust Panel ” , page 157.
• Changes initiated by new hardware:
- Updated the altitude specifications and maximum ambient operating temperature
for EC-200/EC-210. Refer to
“ Installation requirements ” , page 44.
- Added description of quad-channel DisplayPort 1.2 input card. Refer to “ Quad
Channel DisplayPort 1.2 Input Card ” , page 65.
- Added description of quad HDMI 2.0 output card. Refer to “ Quad HDMI 2.0 Output
Card ” , page 73.
- Updated the disassembly and assembly instructions for the Tri-Combo input and
Tri-Combo output cards. Refer to
“ Tri-Combo Input and Tri-Combo Output Card
Disassembly and Assembly ” , page 391.
12
• Changes initiated by software updates (versions 6.3, 6.5, and 7.0):
- Added "Admin lock" mode in front panel of E2/S3 under the System menu. Refer to
“ System menu > Admin Lock ” , page 98.
- Added VPU Resource tab to the system diagram area of the configuration menu.
Refer to
“ Configuration Menu ” , page 109.
- Added a list to show last 100 status bar messages on the bottom status bar. Refer
to
“ Configuration Menu ” , page 109.
- Added EDID DisplayID block checkbox for DP 1.2 inputs. Refer to “ Configuration
Menu > Adjustment > Input Configuration ” , page 122, and see the “ DVI, HDMI and
DisplayPort input types – bottom half ” subsection.
- Added Gamma FX and Colorimetry for DisplayPort and HDMI. Refer to
“ Configuration Menu > Adjustment > Input Configuration ” , page 122, and see the
“ Input adjustment panel > Main page ” subsection, and refer to “ Configuration Menu
> Adjustment > Output Configuration ” , page 136, and see the “ Output adjustment
panel > Connector menu ” subsection.
- Added Flicker Filter controls for AUX Destination interlaced outputs. Refer to
“ Configuration Menu > Add Screen Destinations & Layers ” , page 285, and see the
“ Output menu – Color submenu ” subsection.
- Added a VESA calculator to the Custom Format Adjust tab. Refer to “ Configuration
Menu > Adjustment > Custom Formats Configuration ” , page 172, and see the
“ Custom Format Adjust tab – bottom half ” subsection.
- Added +Add Barco Projector and +Add Event Master XML buttons to the
External Devices tab. Refer to “ Configuration Menu > Adjustment > External
Devices Configuration ” , page 175, and see the “ External Devices tab ” subsection.
- Added "Freeze" mode as a User Key parameter. Refer to “ Programming Menu >
Adjustment area > User Keys configuration ” , page 232, and see the “ User Keys
configuration menu description ” subsection.
- Added "Auto Layout Dest" to Multiviewer. Refer to “ Multiviewer Menu > Modifier
area ” , page 249, and see the “ Auto Layout Dest ” subsection, and refer to
“ Multiviewer Menu > Drop Inputs, Backgrounds and Destinations ” , page 299, and
see the “ (Optional) Auto Layout Destination ” subsection.
- Updated JSON APIs:
◦ Added "activateDestGroup".
◦ Added "TestPattern" parameter to "changeContent" and "changeAuxContent".
◦ Added "CueChanged" to "subscribe" and "unsubscribe" APIs.
Refer to “ Event Master series processor JSON RPC remote control ” , page 555.
• Changes initiated by new hardware:
Introduction