Barco Event Master E2 Series, User Manual

Page: 227 / 584

R5905948 /12 Event Master Devices 227
Layer adjustment panel > Layer Effects adjustment
• Layer Opacity adjusts the level of opaqueness of
the layer. The range is from 0 (100% transparent)
to 100 (100% opaque) in 0.01 increments. The
default setting is 100.
• Strobe: Toggles the strobe function on and off.
When On, adjust the strobe Rate interval (in
frames) to set the duration that the source is
frozen until the next grab.
• Flip: Flips the image within the PIP:
- Off: The image is displayed in its original
orientation.
- H: to flip the image horizontally, along the Y
axis.
- V: Flips the image vertically, along the X axis.
- H/V: Flip the image both horizontally and
vertically, along the X and Y axes.
• Freeze: Enables or disables the freeze action.
• RGB Contrast and Brightness settings are
adjustable within a range of 0% to 200%. The
default setting for all of these properties is 100%.
• Gamma is adjustable within a range of 0.3 to 3.30.
The default setting is 1.0.
• Hue is adjustable within a range of -180 to +180
degrees. The default setting is 0 degrees.
• Saturation is adjustable within a range of 0% to
200%. The default setting is 0%.
• Monochrome: Toggle this button to turn the source
video
’ s chroma component on and off. When off,
the image is completely monochrome;
• Invert: Toggle this button to turn the color “ invert ”
function on and off. When on, all image colors are
inverted.
• Reset All: Returns all values to their default
settings.
Note that almost all color correction effects (except
“ invert ” ) work on a keyframe by keyframe basis. This
enables you to morph effects from keyframe to
Keyframe.
EM GUI orientation