Barco Event Master E2 Series, User Manual

Page: 17 / 584

R5905948 /12 Event Master Devices 17
Revision
Changes
output cards and split-mode on the quad-channel DisplayPort output card and the
tri-combo output card.
- Added instructions for creating Super Destinations: refer to “ Configuration Menu >
Adjustment > Destination Configuration ” , page 145 and also to “ Programming
Menu ” , page 196 and “ Programming Menu > Adjustment area > Dest Group
configuration ” , page 228.
- Added several linking examples, covering more than two E2, S3 – 4K, or EX units
and EX units with VPUs: refer to “ Configuration Menu > Linking ” , page 178.
- Updated the JSON listPresets API and added the 3dControl API: refer to “ Event
Master series processor JSON RPC remote control ” , page 555 and see
listPresets and 3dControl .
• Changes initiated by new hardware:
- Added description of Tri-Combo Output card: refer to “ Tri-Combo Output Card ” ,
page 75.
08
• Updated contact information: refer to “ Contact information ” , page 531.
• Added tri-combo input card and tri-combo output card assembly and disassembly
instructions: refer to
“ Tri-Combo Input and Tri-Combo Output Card Disassembly and
Assembly ” , page 391.
09
• Updated the code examples in the JSON RPC remote control section: refer to “ Event
Master series processor JSON RPC remote control ” , page 555.
10
• Changes initiated by software updates (version 6.0):
- Added Cue functionality, refer to “ Cue Menu ” , page 240, “ Cue Menu > Adjustment
area ” , page 241, “ Cue Menu > Cue Workspace area ” , page 242, and “ Cue Menu >
Command resource area ” , page 244.
- Added External Device control functionality: refer to “ Configuration Menu >
Adjustment > External Devices Configuration ” , page 175.
- Added “ PGM only ” canvas mode: refer to “ Configuration Menu > System modifier
area ” , page 115.
- Updated the JSON RPC remote control section, refer to “ Event Master series
processor JSON RPC remote control ” , page 555 and see Use JSON from the
web application , activateCue , and listCues .
• Changes initiated by new hardware:
- Added EC-210 content: refer to “ Event Master devices overview ” , page 26, “ Event
Master controllers features ” , page 37, “ Initial inspection ” , page 44, “ Controller
Orientation ” , page 327, “ Controller Configuration ” , page 351, “ Controller
Operation ” , page 359, “ EC-200/EC-210 maintenance actions ” , page 381, “ EC-200/
EC-210 Maintenance ” , page 525, and “” , .
- Added description of Quad HDMI 2.0 input card: refer to “ Quad HDMI 2.0 Input
Card ” , page 67.
Introduction