Barco Event Master E2 Series, User Manual

Page: 120 / 584

R5905948 /12 Event Master Devices 120
Setup tab:
• Unit ID: Unique unit identification number.
• Flash Front Panel: Flashes the front panel.
• Lock Front Panel: Locks or unlocks the front
panel.
• Front Panel VFD Brightness: Updates the
brightness of the front panel VFD.
• Last slot as MVR: Allows the operator to use the
last slot as an Output or as a Multiviewer (MVR).
a) Check or uncheck the ‘ Last Slot as MVR ’
checkbox.
Note: 'Last slot as MVR' is the default setting.
b) Save the configuration.
c) Power cycle or soft reset the unit for the change
to
‘ Last Slot as MVR ’ to take effect.
◦ To soft reset the unit, go to the Reset section
of the Adjust > Settings panel and select
‘ Soft. ’
d) If a Gen 2 HDMI 2.0 output card is in installed in
the last slot, the operator may select one 4K
MVR output or four (all) HD outputs.
• Black on invalid video: If selected, when the input
timing on the video does not match what was
previously acquired on the input connector the
video will be set to black.
EM GUI orientation