Barco Event Master E2 Series, User Manual

Page: 458 / 584

R5905948 /12 Event Master Devices 458
15.10 Front Panel Knob
Flow chart
Image 15-18
Before you proceed removing the Front panel knob you need to remove the Front Cover Assembly
as outlined in the related procedure.
Necessary tools
• Knob removal tool provided by Barco
Image 15-19
• Flat head screwdriver or a tool with a sharp edge
How to remove the Front Panel Knob
1. Remove the knob cover with a flat screw driver or a sharp object to expose the inside of the knob.
Image 15-20
2. Use the knob removal tool provided by Barco to take out the knob. Align the notches on the tool with the
grooves in the knob as indicated below.
Note: If the tool is not available use fine point needle nose pliers to squeeze at knob between the two
grooves while pulling it out.
S3 Maintenance