Barco Event Master E2 Series, User Manual

Page: 16 / 584

R5905948 /12 Event Master Devices 16
Revision
Changes
- Descriptions of the subtabs in the Settings Menu, Resources area, see “ Settings
Menu ” , page 253.
- Soft-Off button in the EC-200 GUI, see “ How to power down and restart the EC-
200/EC-210 ” , page 360.
- Split-Mode configuration, see “ Configuration Menu > System diagram area ” , page
112.
- Added JSON RPC section to the Remote Control Protocol appendix, see “ Event
Master series processor JSON RPC remote control ” , page 555.
05
• Changes initiated by:
- EC-30 product release
- New software version (4.2).
◦ EX support for two VPU cards: refer to “ Event Master series processors
features ” , page 31 and see the Program screens table, and see the
Specifications table in “ VPU Card ” , page 81.
◦ More Configuration Menu > Linking examples: refer to “ Configuration Menu >
Linking ” , page 178 and see "How to Link an E2 Unit and two S3-4K Units" and
"How to Link an S3-4K Unit and an EX Unit with two VPU cards.
◦ "Basic Mode" and "Expert Mode" for Data-doubling: refer to “ Configuration
Menu > Adjustment > Destination Configuration ” , page 145 and see "Data-
doubling submenu — Basic Mode" and "Data-doubling submenu — Expert
Mode."
◦ Pick Hue: refer to “ Programming Menu > Adjustment area > Layer
configuration ” , page 218 and see "Pick Hue."
◦ Updated Complete and Relative Presets: refer to “ Programming Menu >
Adjustment area > Presets configuration ” , page 235 and see "Presets
configuration menu description" and "Complete vs Relative."
06
• Changes initiated by software updates (versions 4.2 and 5.0):
- Updated the procedure to create and transfer an offline configuration to a live unit:
refer to
“ System menu > USB device (Backup/Restore) ” , page 90 and see How to
create a configuration offline and transfer it to a live unit.
- Added instructions for changing the last slot from Multiviewer (MVR) to Output and
from Output to MVR: refer to
“ Configuration Menu > Adjustment > Unit
Configuration ” , page 118 and see Last slot as MVR or Output in the simulator.
- Updated Input, Background, and Output menu descriptions with new options: refer
to
“ Configuration Menu > Adjustment > Input Configuration ” , page 122,
“ Configuration Menu > Adjustment > Background Configuration ” , page 133, and
“ Configuration Menu > Adjustment > Output Configuration ” , page 136 and see the
menu descriptions.
- Added Output rotation icons to the Assign Menu for Destination configuration: refer
to
“ Configuration Menu > Adjustment > Destination Configuration ” , page 145 and
see Assign Menu.
• Changes initiated by new hardware:
- Added description of Tri-Combo Input card: refer to “ Tri-Combo Input Card ” , page
68.
- Added “ EX Maintenance ” , page 501.
- Added “ EC-30 Maintenance ” , page 519.
07
• Changes initiated by software updates (version 5.1):
- Corrected HDCP support for the quad-channel DisplayPort output card; see “ Quad
Channel DisplayPort 1.2 Output Card ” , page 70.
- Added instructions and descriptions for importing a PNG with alpha channel
(transparency) information preserved for Key Cut + Fill layers: refer to
“ Presentation System overview ” , page 43, “ Programming Menu > Resources
area ” , page 198, and “ Programming Menu > Drop Sources, Layers into Screen
Destinations & Sources into layers ” , page 295.
- Refer to “ Configuration Menu > System diagram area ” , page 112: updated the
Diagram area image and color-code description to include the tri-combo input and
Introduction