Barco Event Master E2 Series, User Manual

Page: 253 / 584

R5905948 /12 Event Master Devices 253
6.44 Controller Menu
General
Event Master processors and devices can be supported by Event Controllers, hardware consoles specifically
designed to facilitate and accelerate the operations during the show.
Controller Menu is the module used to
setup the selected console.
This menu is accessible by clicking the Controller icon in the menu bar on the left side of the UI.
Description
Image 6-115: Controller menu overview
1 Controller menu
2 Resources area
3 System diagram area
The Controller setup page is divided in two parts. One list of available resources (right side of the page) and
one virtual representation of the selected controller.
The user can assign resources from the list onto controller buttons via drag and drop, or remove incorrect
mapping.
Refer to the chapter “ Assigning resources to the desk ” , page 357 for more information about the Controller
Menu setup page.
6.45 Settings Menu
General
The Settings menu provides access to the Event Master series processor web app that is built into the unit.
The app provides users with diagnostic reports, includes an FAQ section and contact information and supports
system backup / restore and new firmware installation.
Description
This menu is accessible by clicking the System Settings icon on the menu bar on the left side of the UI.
EM GUI orientation