Barco Event Master E2 Series, User Manual

Page: 37 / 584

R5905948 /12 Event Master Devices 37
2 The S3 – 4K Jr. comes with a single power supply; the redundant power supply is optional.
3.3 Event Master controllers features
Connectivity
EC-30 EC-50 EC-200 EC-210
USB connection from
Event Master Toolset
host computer (OSX or
Windows 7 and higher) USB connection from
Event Master Toolset,
either from a control
computer or the EC-200
controller
• 4 USB connectors in
the back can be used
for keyboard and
mouse and other
supported USB
devices.
• 1 USB connector in
the middle of the top
of the console is on
delivery fitted with a
USB memory.
• 4 USB connectors in
the back can be used
for keyboard and
mouse and other
supported USB
devices.
• 1 USB connector in
the middle of the top
of the console is on
delivery fitted with a
USB memory.
NA DVI input for touchscreen
monitor 2 connectors DVI-D
(Screen output 1 and 2)
• 1 HDMI output
connector to show a
third EMTS window
on an external
monitor, supporting
up to 2560 x 1080.
• 1 HDMI input
connector to for video
to be shown on the
left touchscreen.
NA NA 2 Ethernet connectors
(outlet 1 to your Event
Master Device Network
for static IP address and
outlet 2 for a DHCP
assigned IP address) 2 Ethernet connectors
(outlet 1 to your Event
Master Device Network
for static IP address and
outlet 2 for a DHCP
assigned IP address)
General