Arris C4, User Manual

Page: 53 / 3180

Chapter 2: C4/C4c CMTS Features
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 53

2Dx12U CAM — full DOCSIS 2.0 (A-TDMA and S-CDMA)

Proprietary automatic ingress noise cancellation

Flash disk re-partitioning

Graceful restart with OSPFv2

Real-time FFT of upstream (compatible with C3 CMTS MIBs)

NAM IP interface bundling

Increased subscriber limits per chassis: 32,000 CMs per chassis, and 3,000 CMs per downstream (500 per upstream in
1x6 operation)

Preemption of normal calls by new emergency calls when BW is limited

Additional audits: FCM, file system, 2Dx12U

CM reset clear trap

Flap List enhancements:

percent of station maintenance ranging opportunities that receive a range request

number of power adjustments exceeding a threshold

Number of CRC errors per CM (2D only)

Number of bytes dropped per CM (congestion and policing)

Virtual System Controller

CLI Improvements:

show/copy running-config

show cable qos profile

assign and display an output name or description for each interface.
To look up syntax and parameters for individual CLI commands, see Command Line Descriptions (page 1127). Each entry in
the alphabetical list of commands is hyperlinked to the appropriate page in the manual.

Automatic fan speed control

Encryption of MD5 shared secret for routing protocols in CLI output

Disabled ICMP Unreachables

OSPF "point-to-point" interface support

Increased AC/DC power solution

Voice call requirements:

At least 1,000 MTAs (Multimedia Terminal Adapters) per downstream

At least 5,000 BHCAs with completion rate of 99.5%