Chapter 7: Router Control Module (RCM)
STANDARD Revision 1.0
C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved.
217
2.
Grip the sides of the XFP or SFP with your thumb and forefinger and insert it into the selected RCM port and push
firmly until it seats.
Figure 56:
Installing the XFPs and SFPs
CAUTION: Do not install or remove fiber-optic modules with the cables attached. It will damage the housing. Disconnect
all cables before removing or installing an XFP or SFP module.
3.
Lock the XFP or SFP into place by moving the latch to the right into the locked position. The latch is properly closed
when access to the connector is not obstructed.
4.
Remove the protective caps from the connectors on the fiber-optic cable and save them for future use.
5.
Plug the appropriate fiber-optic cable into the connector on the XFP or SFP until it clicks in place.
6.
Install Copper SFP Into GigE Ports
To install the Copper SFP option perform the following steps:
1.
Ground yourself properly with an electrostatic discharge (ESD) strap.
2.
Open the latch on the module.
