Chapter 46: Command Line Descriptions
STANDARD Revision 1.0
C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved.
1948
configure interface loopback * ipv6 ospf area
Purpose
Enables OSPF for IPv6 on the specified loopback interface.
Default Access Level
15
Command Syntax
configure interface loopback <0-15> ipv6 ospf area <word> [instance <int>]
configure interface loopback <0-15> ipv6 ospf area [<word>] [instance <int>] no
Supplemental
Information
To disable, use the no option.
Parameters
<0-15>
The Loopback interface number. Valid range is 0 to 15.
<word>
OSPF area ID. It can be specified as either an IP address or decimal value.
[instance <int>]
Integer. Controls selection of other routers on this link as your neighbors.