Chapter 45: CLI Overview
STANDARD Revision 1.0
C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved.
1125
all online CCMs in this FlexPath CM
The columns feature cannot be used with other show cable modem parameters. As such, the user cannot simultaneously
specify which columns they wish to see along with filtering or sorting commands. Due to a software limitation, the CLI
cannot currently support the following syntax without circumventing the existing infrastructure:
show cable modem column <c1> <c2> . . <cn> slot 4
To reach this goal, additional syntax has been designed to give the desired flexibility:
configure cable modem format <fname> <c1> <c2> .. <cn>
show cable modem format <fname> slot 4
So, using a format name as a handle or shorthand for column output was seen as the best way to accomplish the goal of
allowing the user full control over the filtering, sorting, and output functions of
show cable modem
. You can define formats
and then create an alias for
show cable modem format <fname>
which would allow the user to pass parameters using the
alias.
Help Enhancements
Due to the large number of columns that the CMTS supports, it was thought that a listing of the available parameters
would be more helpful than a full description. This command is modeled after the
show cable modem vendor ?
command
help output which just displays a list of vendors. The
show cable modem column ?
command will list only the available
parameters and the output would look similar to the output below:
show cable modem column ?
multiple-uchan - Display multiple rows for primary and non-primary US channels per CM
---------- OR Enter one or more of the following columns ----------
----- A * in front of the column indicates that it will display multiple rows for CPEs ----
bonded cm-up-pwr flap-last-flap microreflec
bonded-actual congest-down flap-prev-state policed-down
bpi congest-up flaps-prov power-adj
cable-mac cpe-count flaps-ranging qos
cfgfile *cpe-ip flaps-reg rec-pwr
cfgfile-long *cpe-mac fpccm-online response-percent
*cm-cpe-ip *cpe-type fpcm-cpe service-type-curr
cm-down-pwr crc fpcm-id service-type-prov
cm-down-snr docsis-mac fpcm-qos sid
cm-ip docsis-prov hcs snr
cm-mac fec-corrected interface state
cm-microreflec fec-percent-uncorrected interface-docsis20 state-docsis20
cm-sysdesc fec-uncorrected l2vpn-id timing
