Advantech EKI-9312P Series, User Manual

Page: 200 / 286

M
ANAGEMENT
I
NTERFACE
The following table describes the items in the previous menu.
Table 3-135. Multicast > MLD Snooping > VLAN Configuration
Parameter Description
VLAN ID Click the drop-down menu to specify the list of VLAN IDs for which MLD Snooping
is enabled.
VLAN ID Enter a value for the VLAN ID. Appears when "New Entry" is selected in VLAN ID
combo box. Specifies VLAN ID for which pre-configurable Snooping parameters
are to be set.
Admin Mode Displays the MLD Snooping status for the specified VLAN ID.
Fast Leave Admin Click the drop-down menu to enable or disable the MLD Snooping Fast Leave
Mode Mode for the specified VLAN ID.
Group Membership Enter the value for group membership interval of MLD Snooping for the specified
Interval VLAN ID. Valid range is (Maximum Response Time + 1) to 3600.
Maximum Response Enter the value for maximum response time of MLD Snooping for the specified
Time VLAN ID. Valid range is 1 to (Group Membership Interval - 1). Its value should be
less than group membership interval value.
Multicast Router Enter the value for multicast router expiry time of MLD Snooping for the specified
Expiry Time VLAN ID. Valid range is 0 to 3600.
Submit Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Delete Click Delete to remove the switch with the default values.
Multicast Router Status
The MLD Snooping Multicast Router Status displays the multicast router settings for each
interface. To access this page, click
Multicast > MLD Snooping > Multicast Router
Status .
Figure 3-139. Multicast > MLD Snooping > Multicast Router Status
188