Advantech EKI-9312P Series, User Manual

Page: 254 / 286

M
ANAGEMENT
I
NTERFACE
Rule Configuration
The Rule Configuration page allows users to configure the rules for the MAC Access
Control Lists. To access this page, click
QoS > Access Control Lists > MAC Access
Control Lists > Rule Configuration .
Figure 3-190. QoS > Access Control Lists > MAC Access Control Lists > Rule
Configuration The following table describes the items in the previous menu.
Table 3-187. QoS > Access Control Lists > MAC Access Control Lists >
Rule Configuration
Parameter Description
MAC ACL Name Click the drop-down menu to update the rule.
Rule Click the drop-down menu to create or configure an existing rule.
Rule ID Enter the rule ID (between 1 to 1023).
Action Click Configure and click drop-down menu to select Permit or Deny if a packet
matches the rule's criteria.
Match Every Click Configure and click drop-down menu to select an indication to match every
layer 2 MAC packet.
The options are:
 True - Signifies that every packet is considered to match the selected ACL
Rule.

False - Signifies that it is not mandatory for every packet to match the selected
ACL Rule.
Logging Displays login status. When set to 'True', logging is enabled for this ACL rule (sub-
ject to resource availability in the device). If the Access List Trap Flag is also
enabled, this will cause periodic traps to be generated indicating the number of
times this rule was 'hit' during the current report interval. A fixed 5 minute report
interval is used for the entire system. A trap is not issued if the ACL rule hit count is
zero for the current interval.
Assign Queue ID Displays the queue identifier. Specifies the hardware egress queue identifier used
to handle all packets matching this ACL rule. Valid range of Queue Ids is 0 to 7.
This field is visible for a 'Permit' Action.
Mirror Interface Enter the specific egress interface where the matching traffic stream is copied in
addition to being forwarded normally by the device. This field cannot be set if a
Redirect Interface is already configured for the ACL rule. This field is visible for a
'Permit' Action.
Redirect Interface Enter the specific egress interface where the matching traffic stream is forced,
bypassing any forwarding decision normally performed by the device. This field
cannot be set if a Mirror Interface is already configured for the ACL rule. This field
is visible for a 'Permit' Action.
242