Advantech EKI-9312P Series, User Manual

Page: 188 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-120. Multicast > IGMP Snooping > Interface Configuration (Continued)
Parameter Description
Group Membership Enter the amount of time you want the switch to wait for a report for a particular
Interval group on a particular interface before it deletes that interface from the group. The
valid range is from 2 to 3600 seconds. The default value is 260 seconds. The con-
figured value must be greater than the Max Response Time.
Max Response Time Enter the amount of time you want the switch to wait after sending a query on an
(Less Than Group interface because it did not receive a report for a particular group on that interface.
Membership Interval) The valid range is 1 to 25 seconds. Enter a value greater or equal to 1 and less
than the Group Membership Interval in seconds. The default is 10 seconds. The
configured value must be less than the Group Membership Interval.
Multicast Router Enter the amount of time you want the switch to wait to receive a query on an inter-
Present Expiration face before removing it from the list of interfaces with multicast routers attached.
Time Enter a value between 0 and 3600 seconds. The default is 0 seconds. A value of
zero indicates an infinite timeout, i.e. no expiration.
Fast Leave Admin Click the drop-down menu to enable or disable the Fast Leave mode for the a par-
Mode ticular interface from the pull-down menu. The default is Disable.
Submit Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
VLAN Status
The IGMP Snooping VLAN Status displays the summary of the IGMP snooping
configuration. To access this page, click Multicast > IGMP Snooping > VLAN Status .
Figure 3-124. Multicast > IGMP Snooping > VLAN Status
The following table describes the items in the previous menu.
Table 3-121. Multicast > IGMP Snooping > VLAN Status
Parameter Description
VLAN ID Displays all VLAN IDs for which the IGMP Snooping mode is Enabled.
Admin Mode Displays IGMP Snooping Mode for VLAN ID.
Fast Leave Admin Displays the Fast Leave Mode for VLAN ID.
Mode
Group Membership Displays the Group Membership Interval of IGMP Snooping for the specified VLAN
Interval (secs) ID. Valid range is 2 to 3600 seconds. Its value should be greater than maximum
response time.
176