M
ANAGEMENT
I
NTERFACE
The following table describes the items in the previous menu.
Table 3-27.
Management > DHCP Server > Global Configuration
Parameter
Description
Admin Mode
Click the drop-down menu to enable or disable DHCP service. The default is Dis-
able.
Ping Packet Count
Enter the number (0 or between 2 to 10) of packets a server sends to a pool
address to check. The default is 2. 0 means disable the function.
Conflict Logging
Click the drop-down menu to enable or disable conflict logging on a DHCP server.
Mode
The default is Enable.
Bootp Automatic
Click the drop-down menu to enable or disable Bootp for dynamic pools. The
Mode
default is Disable.
Add Excluded Addresses
From
Enter an IP address user want to exclude a range of addresses.
To
Enter an IP address user want to exclude a range of addresses. To exclude a sin-
gle address, enter the same IP address as in From or enter 0.0.0.0.
Delete Excluded Addresses
Delete
Check the checkboxes to select the ranges need to be delete.
From
Enter an IP address user want to exclude a range of addresses.
To
Enter an IP address user want to exclude a range of addresses. To exclude a sin-
gle address, enter the same IP address as in From or enter 0.0.0.0.
Submit
Click
Submit
to update the screen. To save the values across a power cycle per-
form a system save.
Delete
Click
Delete
to delete the selected row.
Pool Configuration
The Pool Configuration page allows users to configure settings for existing pools, as well
as create new pools. To access this page, click
Management
>
DHCP Server
>
Pool
Configuration
.
Figure 3-30.
Management > DHCP Server > Pool Configuration
68
Summary of Contents for EKI-9312P Series
Page 13: ...Hardware Installation Chapter 1...
Page 43: ...First Time Setup Chapter 2...
Page 48: ...Management Interface Chapter 3...
Page 285: ...Troubleshooting Chapter 4...
