Advantech EKI-9312P Series, User Manual

Page: 219 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-153. Security > Port Access Control > Port Status (Continued)
Parameter Description
VLAN Assigned Rea- Displays reason for the VLAN ID assigned by the authenticator to the selected
son interface. This field is displayed only when the port control mode of the selected
interface is not mac-based.This field is not configurable. Possible values are:

Radius

Unauth

Default

Not Assigned
Reauthentication Displays the configured reauthentication period for the selected port. The reau-
Period thentication period is the value, in seconds, of the timer used by the authenticator
state machine on this port to determine when reauthentication of the supplicant
takes place. The reauthentication period is a value in the range of 1 and 65535.
Reauthentication Displays if reauthentication is enabled on the selected port. The possible values
Enabled are 'true' and 'false'. If the value is 'true' reauthentication will occur. Otherwise,
reauthentication will not be allowed.
Key Transmission Displays if key transmission is enabled on the selected port. This is not a configu-
Enabled rable field. The possible values are 'true' and 'false'. If the value is 'false' key trans-
mission will not occur. Otherwise Key transmission is supported on the selected
port.
Control Direction Displays the control direction for the specified port. The control direction dictates
the degree to which protocol exchanges take place between Supplicant and
Authenticator. This affects whether the unauthorized controlled port exerts control
over communication in both directions (disabling both incoming and outgoing
frames) or just in the incoming direction (disabling only the reception of incoming
frames). This field is not configurable on some platforms.
Maximum Users Displays the maximum number of clients that can get authenticated on the port in
the MAC-based dot1x authentication mode. The maximum users value is in the
range of (1 to 16).
Unauthenticated Displays the Unauthenticated VLAN ID for the selected port. The valid range is (0
VLAN ID to 4093).
Session Timeout Displays Session Timeout set by the Radius Server for the selected port. This field
is displayed only when the port control mode of the selected port is not mac-based.
Session Termination Displays Termination Action set by the Radius Server for the selected port. This
Action field is displayed only when the port control mode of the selected port is not mac-
based. Possible values are:

Default

Reauthenticate
If the termination action is 'default' then at the end of the session, the client details
are initialized. Otherwise re-authentication is attempted.
Refresh Click Refresh to update the data on the screen with the present state of the data in
the switch.
207