Advantech EKI-9312P Series, User Manual

Page: 281 / 286

M
ANAGEMENT
I
NTERFACE
The following table describes the items in the previous menu.
Table 3-215. Maintenance > Network Diagnostics > Ping
Parameter Description
Host Name/IP Enter the IP Address or Host Name of the station you want the switch to ping. The
Address initial value is blank. The IP Address or Host Name you enter is not retained across
a power cycle. Hostnames are composed of series of labels concatenated with
dots. Each label must be between 1 and 63 characters long, and the entire host-
name has a maximum of 255 characters.
Count Enter the number of echo requests you want to send. The default value is 1. The
value ranges from 1 to 15. The Count you enter is not retained across a power
cycle.
Interval Enter the Interval between ping packets in seconds. The default value is 3. The
value ranges from 1 to 60. The Interval you enter is not retained across a power
cycle.
Size Enter the Size of ping packet. The default value is 0. The value ranges from 0 to
65507. The Size you enter is not retained across a power cycle.
Ping Click This screen displays the reply format of ping. If a reply to the ping is not
received, you will see

Tx = Count, Rx = 0 Min/Max/Avg RTT = 0/0/0 msec, otherwise you will see
 Received response for Seq Num 0 Rtt xyz usec

Received response for Seq Num 1 Rtt abc usec
 Received response for Seq Num 2 Rtt def usec

Tx = Count, Rx = Count Min/Max/Avg RTT = xyz/abc/def msec.
Submit Update the switch with the values on the screen. If you want the switch to retain the
new values across a power cycle you must perform a save.
TraceRoute
The TraceRoute page allows users to determine the layer 3 path to a specific IP address or
hostname. To access this page, click Maintenance > Network Diagnostics > TraceRoute .
Figure 3-219. Maintenance > Network Diagnostics > TraceRoute
269