Advantech EKI-9312P Series, User Manual

Page: 246 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-181. QoS > Access Control Lists > IP Access Control Lists > Rule
Configuration (Continued)
Parameter Description
Protocol Number Displays the IP protocol match condition for the selected IP ACL rule and identify
the protocol by number. The protocol number is a standard value assigned by IANA
and is interpreted as an integer from 1 to 255. Either the 'Protocol Number' field or
the 'Protocol Keyword' field can be used to specify an IP protocol value as a match
criterion.
Source IP Address Enter an IP address using dotted- decimal notation to be compared to a packet's
source IP Address as a match criteria for the selected IP ACL rule.
Source IP wildcard Enter the IP wildcard mask in dotted-decimal notation to be used with the Source
mask IP Address value.
Source L4 Port Key- Enter a packet's source layer 4 port as a match condition for the selected extended
word IP ACL rule. This is an optional configuration. The possible values are DOMAIN,
ECHO, FTP, FTPDATA, HTTP, SMTP, SNMP, TELNET, TFTP, and WWW. Each of
these values translates into its equivalent port number, which is used as both the
start and end of the port range. Either the 'Source L4 Port Keyword' field or the
'Source L4 Port Range' fields can be used to specify a source layer 4 port range as
a match criterion.
Source L4 Port Num- Enter a packet's source layer 4 port as a match condition for the selected extended
ber IP ACL rule. This is an optional configuration.
Source L4 Port Enter the first port of the port range for a packet's source layer 4 port match condi-
Range (start port) tion for the selected extended IP ACL rule. Range of valid values is 0 to 65535. The
value of the start port must be less than or equal to the end port. The start port, end
port, and all ports in between will be part of the contiguous source port range. This
is an optional configuration.
Source L4 Port Enter the last port of the port range for a packet's source layer 4 port match condi-
Range (end port) tion for the selected extended IP ACL rule. Range of valid values is 0 to 65535. The
value of the end port must be greater than or equal to the start port. The start port,
end port, and all ports in between will be part of the contiguous source port range.
This is an optional configuration.
Destination IP Enter an IP address using dotted-decimal notation to be compared to a packet's
Address destination IP Address as a match criteria for the selected extended IP ACL rule.
Destination IP wild- Enter the IP wildcard mask in dotted-decimal notation to be used with the Destina-
card mask tion IP Address value.
Destination L4 Port Enter the destination layer 4 port match conditions for the selected extended IP
Keyword ACL rule. The possible values are DOMAIN, ECHO, FTP, FTPDATA, HTTP, SMTP,
SNMP, TELNET, TFTP, and WWW. Each of these values translates into its equiva-
lent port number, which is used as both the start and end of the port range. Either
this field or the 'Destination L4 Port Range' fields can be used to specify a destina-
tion layer 4 port range as a match criterion. This is an optional configuration.
Destination L4 Port Enter a packet's destination layer 4 port number match condition for the selected
Number extended IP ACL rule. This is an optional configuration.
234