M
ANAGEMENT
I
NTERFACE
Figure 3-16.
Management > Power over Ethernet > Interface Configuration and
Status
The following table describes the items in the previous menu.
Table 3-14.
Management > Power over Ethernet > Interface Configuration
and
Status
Parameter
Description
Interface
Click the drop-down menu to select a PSE port to apply the settings.
Admin Mode
Click the drop-down menu to enable or disable PSE function of the port. The
default is "Enable".
Power Budget (1/10
Enter a value (between 150 to 342) to specify the maximum of PSE supply power.
Watts)
The default is 342.
Power Priority
Click the drop-down menu to select the power-on priority of PSE port.
Power Pairs
Click the drop-down menu to select the power-carrying pairs.
Signal - Supply PD power via 1/2 and 3/6 wire pairs.
Spare - Supply PD power via 4/5 and 7/8 wire pairs.
54
Summary of Contents for EKI-9312P Series
Page 13: ...Hardware Installation Chapter 1...
Page 43: ...First Time Setup Chapter 2...
Page 48: ...Management Interface Chapter 3...
Page 285: ...Troubleshooting Chapter 4...
