Advantech EKI-9312P Series, User Manual

Page: 116 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-61. Management > RADIUS > Configuration (Continued)
Parameter Description
Timeout Duration Enter the timeout value, in seconds, for request retransmissions. The valid range is
(secs) 1 - 30. Default value is 5. See the Max Number of Retransmits field description for
more information about configuring the timeout duration.
Accounting Mode Click the drop-down menu to select whether the RADIUS accounting mode is
enabled or disabled on the current server. By default it is disabled.
Enable RADIUS Click the box to set the network access server (NAS) IP address for the RADIUS
Attribute 4 (NAS-IP server, select the option and enter the IP address of the NAS in the available field.
Address) The address should be unique to the NAS within the scope of the RADIUS server.
The NAS IP address is only used in Access-Request packets. By default this mode
is disabled.
NAS-IP Address Enter the NAS-IP Address of the RADIUS authentication client referred to in this
table entry. By default it is not configured.
Submit Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Refresh Click Refresh to clear the database and display it again starting with the first entry
in the table.
Server Configuration
The Server Configuration page allows users to view and configure RADIUS Server.
To access this page, click Management > RADIUS > Server Configuration .
Figure 3-64. Management > RADIUS > Server Configuration
104