M
ANAGEMENT
I
NTERFACE
Table 3-105.
Switching > GARP > Status (Continued)
Parameter
Description
Port GMRP Mode
Displays the GMRP administrative mode for the port is enabled or disabled. The
factory default is Disable.
Join Timer (centi-
Displays the time between the transmission of GARP PDUs registering (or re-regis-
secs)
tering) membership for a VLAN or multicast group in centiseconds. An instance of
this timer exists for each GARP participant for each port. Permissible values are 10
to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20 centiseconds
(0.2 seconds).
Leave Timer (centi-
Displays the time to wait after receiving an unregister request for a VLAN or multi-
secs)
cast group before deleting the associated entry, in centiseconds. This allows time
for another station to assert registration for the same attribute in order to maintain
uninterrupted service. An instance of this timer exists for each GARP participant for
each port. Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The
factory default is 60 centiseconds (0.6 seconds).
Leave All Timer (cen-
Displays the Leave All Time controls how frequently LeaveAll PDUs are generated.
tisecs)
A LeaveAll PDU indicates that all registrations will shortly be deregistered. Partici-
pants will need to rejoin in order to maintain registration. An instance of this timer
exists for each GARP participant for each port. The Leave All Period Timer is set to
a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible val-
ues are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000
centiseconds (10 seconds).
Refresh
Click
Refresh
to update the data on the screen with the present state of the data in
the switch.
Global Configuration
The GARP Switch Configuration page allows users to enable or disable the GVRP and
GMRP modes. To access this page, click
Switching
>
GARP
>
Global Configuration
.
Figure 3-109.
Switching > GARP > Global Configuration
156
Summary of Contents for EKI-9312P Series
Page 13: ...Hardware Installation Chapter 1...
Page 43: ...First Time Setup Chapter 2...
Page 48: ...Management Interface Chapter 3...
Page 285: ...Troubleshooting Chapter 4...