M
ANAGEMENT
I
NTERFACE
3.1. Log In
To access the log in window, connect the device to the network, see “Communication Port
Wiring” on page 25 and open a browser window.
Enter the default user name and password (admin/admin) to log into the management
inter-face. You can change the default password after you have successfully logged in.
Figure 3-1.
Login Screen
3.2. Recommended Practices
3.2.1 Changing Default Password
In keeping with good management and security practices, it is recommended that you
change the default password as soon as the device is functioning and setup correctly.
The following details the necessary steps to change the default password.
To change the password:
1.
Navigate to
Management
>
Local Password Management
>
User Accounts
.
2.
From the User drop-down menu, select the admin (default) account.
3.
In the User Name field, enter a new user name for this account. It is not necessary to
change the user name, however, a change in the default settings increases the
security settings.
4.
In the password field, type in the new password. Re-type the same password in the
Confirm Password field.
37
Summary of Contents for EKI-9312P Series
Page 13: ...Hardware Installation Chapter 1...
Page 43: ...First Time Setup Chapter 2...
Page 48: ...Management Interface Chapter 3...
Page 285: ...Troubleshooting Chapter 4...
