Advantech EKI-9312P Series, User Manual

Page: 252 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-184. QoS > Access Control Lists > IPv6 Access Control Lists > Rule
Configuration (Continued)
Parameter Description
Flow Label Enter a label is 20-bit number that is unique to an IPv6 packet, used by end sta-
tions to signify quality-of-service handling in routers. Flow label can specified within
the range 0 to 1048575.
IPv6 DSCP Service Enter the IP DiffServ Code Point (DSCP) field. The DSCP is defined as the high-
order six bits of the Service Type octet in the IPv6 header. This is an optional con-
figuration. Enter an integer from 0 to 63. The IPv6 DSCP is selected by possibly
selection one of the DSCP keyword from a drop-down box. If a value is to be
selected by specifying its numeric value, then select the 'Other' option in the drop-
down box and a text box will appear where the numeric value of the DSCP can be
entered.
Configure Click Configure to setup the corresponding match criteria for the selected rule.
Delete Click Delete to remove the currently selected Rule from the selected ACL. These
changes will not be retained across a power cycle unless a save configuration is
performed.
Submit Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
This button is shown when you are configuring individual match conditions.
Cancel Click Cancel to discard the changes made on the page.
MAC Access Control Lists
Configuration
The Configuration page allows users to configure settings for existing MAC ACLs or create
new ones. To access this page, click
QoS > Access Control Lists > MAC Access
Control Lists > Configuration .
Figure 3-188. QoS > Access Control Lists > MAC Access Control Lists > Configuration
240