M
ANAGEMENT
I
NTERFACE
Table 3-40.
Management > Date and Time > Server Configuration (Continued)
Parameter
Description
Version
Enter the NTP Version running on the server. Allowed range is 1 to 4. Default value
is 4.
Submit
Press
Submit
to submit the values on the screen. If you want the switch to retain
the new values across a power cycle you must perform a save.
Delete
Press
Delete
to remove the SNTP Server entry. Sends the updated configuration
to the switch. Configuration changes take effect immediately.
Server Status
The SNTP Server Status displays server information. Users can select the server IP
address from the drop-down menu. To access this page, click
Management
>
Date
and
Time
>
Server Status
.
Figure 3-43.
Management > Date and Time > Server Status
The following table describes the items in the previous menu.
Table 3-41.
Management > Date and Time > Server Status
Parameter
Description
Address
Displays all the existing Server Addresses. If no Server configuration exists, a mes-
sage saying "No SNTP server exists" flashes on the screen.
Last Update Time
Displays the local date and time (UTC) that the response from this server was used
to update the system clock.
Last Attempt Time
Displays the local date and time (UTC) that this SNTP server was last queried.
Last Attempt Status
Displays the status of the last SNTP request to this server. If no packet has been
received from this server, a status of other is displayed.
Other - None of the following enumeration values.
Success - The SNTP operation was successful and the system time was
updated.
Request Timed Out - A directed SNTP request timed out without receiving a
response from the SNTP server.
Bad Date Encoded - The time provided by the SNTP server is not valid.
Version Not Supported - The SNTP version supported by the server is not com-
patible with the version supported by the client.
Server Unsynchronized - The SNTP server is not synchronized with its peers.
This is indicated via the 'leap indicator' field on the SNTP message.
Server Kiss Of Death - The SNTP server indicated that no further queries were
to be sent to this server. This is indicated by a stratum field equal to 0 in a
message received from a server.
83
Summary of Contents for EKI-9312P Series
Page 13: ...Hardware Installation Chapter 1...
Page 43: ...First Time Setup Chapter 2...
Page 48: ...Management Interface Chapter 3...
Page 285: ...Troubleshooting Chapter 4...
