Advantech EKI-9312P Series, User Manual

Page: 233 / 286

M
ANAGEMENT
I
NTERFACE
The following table describes the items in the previous menu.
Table 3-166. Security > DHCP Snooping > Statistics
Parameter Description
Interface Displays the untrusted and snooping enabled interface for which statistics to be
displayed.
MAC Verify Failures Displays number of packets that were dropped by DHCP Snooping as there is no
matching DHCP Snooping binding entry found.
Client Ifc Mismatch Displays the number of DHCP messages that are dropped based on source MAC
address and client HW address verification.
DHCP Server Msgs Displays the number of Server messages that are dropped on an untrusted port.
Received
Clear Statistics Click Clear Statistics to reset all interfaces statistics.
DHCP L2 Relay
Global Configuration
The DHCP L2 Relay Global Configuration page allows users to enable or disable DHCP L2
Relay Mode. To access this page, click Security > DHCP Snooping > DHCP L2 Relay >
Global Configuration .
Figure 3-170. Security > DHCP Snooping > DHCP L2 Relay > Global
Configuration The following table describes the items in the previous menu.
Table 3-167. Security > DHCP Snooping > DHCP L2 Relay > Global Configuration
Parameter Description
DHCP L2 Relay Click the drop-down menu to enable or disable the DHCP L2 Relay feature. The
Mode factory default is Disable.
Submit Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
221