Advantech EKI-9312P Series, User Manual

Page: 75 / 286

M
ANAGEMENT
I
NTERFACE
Trap Server Configuration
The SNMP Trap Server Configuration page allows users to configure SNMP trap receiver
settings. To access this page, click Management > SNMP > Trap Server Configuration .
Figure 3-24. Management > SNMP > Trap Server Configuration
The following table describes the items in the previous menu.
Table 3-22. Management > SNMP > Trap Server Configuration
Parameter Description
SNMP Trap Name Click the drop-down menu to select a SNMP trap name or select Create to create a
new one (up to 16 characters and case sensitive).
SNMP Version Click the drop-down menu to select a SNMP version.
The version options are:
 SNMP v1 - Uses SNMP v1 to send traps to the receiver.
 SNMP v2 - Uses SNMP v2 to send traps to the receiver.
Protocol Click the drop-down menu to select a protocol for the SNMP trap receiver configu-
ration.
The options are:
 IPv4 - Choose IPv4 to enter the address in IPv4 format.
IP Address Enter the IP address to the selected protocol.
Status Click the drop-down menu to enable or disable receiver's status.

Enable - Send traps to the receiver.
 Disable - Do not send traps to the receiver.
Submit Click Submit to update the screen. To save the values across a power cycle per-
form a system save.
Delete Click Delete to delete the selected trap name.
63