Advantech EKI-9312P Series, User Manual

Page: 139 / 286

M
ANAGEMENT
I
NTERFACE
The following table describes the items in the previous menu.
Table 3-83. Switching > Interface Setting > Interface Description
Parameter Description
Interface Click the drop-down menu to select the interface for which data is to be displayed
or configured.
Port Description Enter the Description string to be attached to a port. It can be up to 64 characters in
length.
Interface Displays the port type/number for the list entry.
Physical Address Displays the physical address of the specified interface.
Port List Bit Offset Displays the bit offset value which corresponds to the port when the MIB object
type Port List is used to manage in SNMP.
Interface Index Displays the interface index associated with the port.
Port Description Description string attached to a port. It can be of up to 64 characters in length.
Submit Click Submit the switch with the values on the screen. If you want the switch to
retain the new values across a power cycle you must perform a save.
Refresh Click Refresh to update the data on the screen with the present state of the data in
the switch.
Transceiver Status
The Transceiver Information page displays temperature, voltage, bias current, Tx power,
and RX power settings for each interface. To access this page, click
Switching >
Interface Setting > Transceiver Status .
Figure 3-86. Switching > Interface Setting > Transceiver Status
The following table describes the items in the previous menu.
Table 3-84. Switching > Interface Setting > Transceiver Status
Parameter Description
Interface Displays the port.
Temperature Displays the internal temperature of the transceiver measured value.
Voltage Displays the supply voltage of the transceiver measured value.
Bias Current Displays the bias current of the transceiver measured value.
Tx Power Displays the transmission power of the transceiver measured value.
Rx Power Displays the received power of the transceiver measured value.
127