Advantech EKI-9312P Series, User Manual

Page: 134 / 286

M
ANAGEMENT
I
NTERFACE
3.4.2 Interface Setting
Configuration
The Port Configuration page allows users to configure the settings for each interface.
To access this page, click Switching > Interface Setting > Configuration .
Figure 3-83. Switching > Interface Setting > Configuration
The following table describes the items in the previous menu.
Table 3-81. Switching > Interface Setting > Configuration
Parameter Description
Interface Click the drop-down menu to select the interface for which data is to be displayed
or configured.
Port Type Displays the possible values are:
 Normal - the port is a normal port.

Trunk Member - the port is a member of a Link Aggregation trunk. Look at the
LAG screens for more information.
 Mirrored - the port is a mirrored port.

Probe - the port is a monitoring port. Look at the Port Monitoring screens for
more information.
STP Mode Click the drop-down menu to enable or disable the Spanning Tree Protocol Admin-
istrative Mode for the port or LAG. The possible values are:

Enable - select this to enable the Spanning Tree Protocol for this port.
 Disable - select this to disable the Spanning Tree Protocol for this port. STP
Mode is disabled by default.
Admin Mode Click the drop-down menu to enable or disable the pull-down menu to select the
Port control administration state. You must select enable if you want the port to par-
ticipate in the network. The factory default is Enable.
122