Advantech EKI-9312P Series, User Manual

Page: 174 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-109. Switching > Port Channel > Status (Continued)
Parameter Description
Load Balance Displays the Load balance policy of the Port Channel. The possible values are:
 Source MAC, VLAN, Ethertype, and source port

Destination MAC, VLAN, EtherType and source port
 Source/Destination MAC, VLAN, Ethertype, and source port

Source IP and Source TCP/UDP Port

Destination IP and Destination TCP/UDP Port
 Source/Destination IP and source/destination TCP/UDP Port
Refresh Click Refresh to update the data on the screen with the present state of the data in
the switch.
3.4.9 X-Ring Pro
Configuration
The X-Ring Pro Configuration page allows users to configure the settings for each ring ID.
To access this page, click Switching > X-Ring Pro > Configuration .
Figure 3-113. Switching > X-Ring Pro > Configuration
The following table describes the items in the previous menu.
Table 3-110. Switching > X-Ring Pro > Configuration
Parameter Description
Ring ID Specifies a number ranging from 1 to 99 to identify a given X-Ring group.
Mode Click the drop-down menu to select the mode of the X-Ring group. The value is
either "Ring" or "Coupling". The default value is "Ring".
 The X-Ring group denoted as mode "Ring" means this switch is connected to
the other switches to form a ring topology.
 The X-Ring group denoted as "Coupling" means this switch is used to inter-
connect two X-Ring networks.
Interface 1 Click the drop-down menu to select the first member interface for the X-Ring group.
The value is either physical port or LAG (Link-Aggregation-Group) port.
162