Advantech EKI-9312P Series, User Manual

Page: 189 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-121. Multicast > IGMP Snooping > VLAN Status (Continued)
Parameter Description
Maximum Response Displays the Maximum Response Time of IGMP Snooping for the specified VLAN
Time (secs) ID. Valid range is 1 to 25 seconds. Its value should be less than group membership
value.
Multicast Router Displays the Multicast Router Expiry Time of IGMP Snooping for the specified
Expiry Time (secs) VLAN ID. Valid range is 0 to 3600 seconds.
Refresh Click Refresh to update the data on the screen with the present state of the data in
the switch.
VLAN Configuration
The IGMP Snooping VLAN Configuration page allows users of configure IGMP snooping
VLAN settings. To access this page, click Multicast > IGMP Snooping >
VLAN Configuration .
Figure 3-125. Multicast > IGMP Snooping > VLAN Configuration
The following table describes the items in the previous menu.
Table 3-122. Multicast > IGMP Snooping > VLAN Status
Parameter Description
VLAN ID Click the drop-down menu to select create or select a VLAN ID for IGMP Snooping.
VLAN ID Enter the name of the VLAN ID. Appears when New Entry is selected in VLAN ID
combo box. Specifies VLAN ID for which pre-configurable Snooping parameters
are to be set.
Admin Mode Displays the status of the mode for the IGMP Snooping entry.
Fast Leave Admin Click the drop-down menu to enable or disable the IGMP Snooping Fast Leave
Mode Mode for the specified VLAN ID. Fast Leave Admin Mode is disabled by default.
Group Membership Enter the value for group membership interval of IGMP Snooping for the specified
Interval VLAN ID. Valid range is 2 to 3600 seconds. The default value is 260 seconds. The
configured value must be greater than the Max Response Time.
Maximum Response Enter the value for maximum response time of IGMP Snooping for the specified
Time VLAN ID. Valid range is 1 to 25 seconds. Its value should be less than Group Mem-
bership Interval value. Default value is 10 seconds.
177