M
ANAGEMENT
I
NTERFACE
The following table describes the items in the previous menu.
Table 3-98.
Switching > VLAN Setting > IP Subnet-based VLAN > Status
Parameter
Description
IP Address
Displays the IP Address of the subnet that is being bound to a VLAN ID.
Subnet Mask
Displays the subnet mask of the IP Address bound to VLAN ID.
VLAN ID
Displays the VLAN ID to which above mentioned IP Subnet is being bound to.
VLAN ID can be any number in the range of 1 to 4093.
Refresh
Click
Refresh
to update the data on the screen with the present state of the data in
the switch.
MAC-based VLAN
Configuration
The MAC-based VLAN Configuration allows users to configure MAC address and VLAN ID.
To access this page, click
Switching
>
VLAN Setting
>
MAC-based VLAN
>
Configuration
.
Figure 3-102.
Switching > VLAN Setting > MAC-based VLAN >
Configuration
The following table describes the items in the previous menu.
Table 3-99.
Switching > VLAN Setting > MAC-based VLAN > Configuration
Parameter
Description
MAC Address
Click the drop-down menu to select the MAC Address bound to a VLAN. To add
another MAC VLAN entry, select “Add” option.
MAC Address
Enter the MAC address which is to be bound to a VLAN ID. This field is configurable
only when a MAC-based VLAN is created.
VLAN
Enter a value for a VLAN ID: range 1 to 4093.
Submit
Click
Submit
to update the switch with the values on the screen. If you want the switch
to retain the new values across a power cycle you must perform a save.
Delete
Click
Delete
to remove an entry of MAC Address to VLAN mapping.
151
Summary of Contents for EKI-9312P Series
Page 13: ...Hardware Installation Chapter 1...
Page 43: ...First Time Setup Chapter 2...
Page 48: ...Management Interface Chapter 3...
Page 285: ...Troubleshooting Chapter 4...
