Advantech EKI-9312P Series, User Manual

Page: 255 / 286

M
ANAGEMENT
I
NTERFACE
Table 3-187. QoS > Access Control Lists > MAC Access Control Lists > Rule
Configuration (Continued)
Parameter Description
CoS
Click Configure and enter the 802.1p user priority (between 0 to 7) to compare
against an Ethernet frame.
Secondary CoS Click Configure and enter the secondary 802.1p user priority (between 0 to 7) to
compare against an Ethernet frame.
Destination MAC
Click Configure and enter the MAC address (XX:XX:XX:XX:XX:XX) to compare
against an Ethernet frame.
Destination MAC Click Configure and enter the MAC mask address (XX:XX:XX:XX:XX:XX) to com-
Mask pare against an Ethernet frame.
Ethertype Key Click Configure and click the drop-down menu to select the ethertype value.
The options are:

Appletalk

ARP

IBM SNA

IPv4

IPv6

IPX

MPLS multicast

MPLS unicast

NetBIOS

Novell

PPPoE

Reverse ARP

User Value
Ethertype User Value Click Configure and enter the Ethertype value (between 0x0600 to 0xFFFF) when
Ethertype Key is User Value.
Source MAC Click Configure and enter the MAC address (XX:XX:XX:XX:XX:XX).
Source MAC Mask
Click Configure and enter the MAC mask address (XX:XX:XX:XX:XX:XX).
VLAN Range
From Click Configure and enter the VLAN ID (between 0 to 4095) to compare against an
Ethernet frame.
To Click Configure and enter the VLAN ID (between 0 to 4095) to compare against an
Ethernet frame.
VLAN Click Configure and enter the VLAN ID (between 0 to 4095) to compare against an
Ethernet frame.
Secondary VLAN Range
243