Advantech EKI-9312P Series, User Manual

Page: 177 / 286

M
ANAGEMENT
I
NTERFACE
3.4.10 Spanning Tree
Global Configuration/Status
The Spanning Tree Switch Configuration/Status page allows users to configure the settings
for the spanning tree. To access this page, click
Switching > Spanning Tree > Global
Con-figuration/Status .
Figure 3-115. Switching > Spanning Tree > Global Configuration/Status
The following table describes the items in the previous menu.
Table 3-112. Switching > Spanning Tree > Global Configuration/Status
Parameter Description
Spanning Tree Click to the drop-down menu to enable or disable the spanning tree operation.
Admin Mode
Force Protocol Ver- Click to the drop-down menu to specify the Force Protocol Version parameter for
sion the switch, options: IEEE 802.1d, IEEE 802.1w and IEEE 802.1s.
Configuration Name Enter the identifier used to identify the configuration currently being used. It may be
up to 31 characters, default: MAC address.
Configuration Revi- Enter the identifier used to identify the configuration currently being used. The val-
sion Level ues allowed are between 0 and 65535 (default: 0).
Configuration Digest Displays the identifier used to identify the configuration currently being used.
Key
MST ID Displays the table consisting of the MST instances (including the CST) and the cor-
responding VLAN IDs associated with each of them.
VID Displays the table consisting of the VLAN IDs and the corresponding FID.
FID Displays the table consisting of the FIDs and the corresponding VLAN IDs associ-
ated with each of them.
Submit
Click Submit to update the switch with the values on the screen. If you want the
switch to retain the new values across a power cycle you must perform a save.
Refresh Click Refresh to update the data on the screen with the present state of the data in
the switch.
165