Advantech EKI-9312P Series, User Manual

Page: 30 / 286

H
ARDWARE
I
NSTALLATION
10. Insert the screws into the wall sinks. Leave a 6mm gap between the wall and the
screw head to allow for wall mount plate insertion.
6.0 mm
6.0 mm
3.5 mm
Figure 1-11. Securing Wall Mounting Screws

Make sure the screws dimensions are suitable for use with the wall mounting plate.


Do not completely tighten the screws into the wall. A final adjustment may be needed
before fully securing the wall mounting plates on the wall.
11. Align the wall mount plate over the screws on the wall.
12. Install the wall mount plate on the screws and slide it down to lock in place, see the
following figure.
Figure 1-12. Wall Mount Installation
13. Once the device is installed on the wall, tighten the screws to secure the device.
18