November, 2018 Rev.1.4
171
14. On-chip Debug System
14.1 Overview
14.1.1 Description
The On-chip debug system(OCD) of MC96FR364B is used to program/erase the non-volatile memory
or debug the device. The main features are shown as follows.
14.1.2 Features
•
Two-wire external interface : 1-wire serial clock input, 1-wire bi-directional serial data bus
•
Debugger Access to :
•
All Internal Peripheral Units
•
Internal data RAM
•
Program Counter
•
Non-volatile Memories
•
Extensive On-chip Debug Support for Break Conditions, Including
−
Break Instruction
−
Single Step Break
−
Program Memory Break Points on Single Address
−
Programming of Flash, Fuses, and Lock Bits through the two-wire Interface
−
On-chip Debugging Supported by Dr.Choice
®
•
Operating frequency : Supports the maximum frequency of the target MCU
Caution
: When the device operates with OCD module connected, the main oscillator of
MC96FR364B does not stop even if it is in STOP mode.
Summary of Contents for MC96FR364B
Page 17: ...MC96FR364B November 2018 Rev 1 4 17 4 PACKAGE DIMENSION...
Page 18: ...MC96FR364B 18 November 2018 Rev 1 4 Figure 4 1 PKG DIMENSION 28 TSSOP...
Page 23: ...MC96FR364B November 2018 Rev 1 4 23 6 3 REMOUT Port Data PAD VDD Figure 6 3 REMOUT port...
Page 69: ...November 2018 Rev 1 4 69 Initial value 00H BIT 7 0 BIT counter value...
