Abov MC96FR364B, User Manual

Page: 13 / 194

MC96FR364B
November, 2018 Rev.1.4 13
1.4.3.1 E-PGM+
E-PGM+ is a single write tool for ABOV MCUs.
Features :
 Support ABOV / ADAM devices

2~5 times faster than S-PGM+
 Main controller : 32 bit MCU @72MHz
 Buffer memory : 1MB
1.4.3.2 PGMPlusLC-II
PGMPlusLC-II is for ISP (In System Programming). It is used to program or erase the MCU which is
already mounted on the target board using 10pin cable.
Features :
 PGMPlusLC-II is low cost writing tool
 USB interface is supported
 No need for USB driver installation
 Connect to the external power adaptor (5V@2A)
 Fast 32-bit Cortex-M3 MCU is used
 Support high voltage up to max 18V

PGMPlusLC-II is based on PC environment
 PGMPlusLC-II is faster than PGMplusLC
 Transmission speed of 64KB/s
Figure 1-3 E-PGM+
1. MCU RX
2. VDD
3. MCU TX
4. GND
5. Run Flag or Boot Pin
6. Serial Clock (DSCL)
7. GND
8. Serial Data (DSDA)
9. N/A
10. VPP or Reset Pin
Enter Key Connector.
To connect with the auto-
handler
Power DC 9 ~ 15V
For ISP (In-System-Programming) For Barcode reader