- 1 -
www.zeeltronic.com
[email protected]
updated 02.02.2016
program version: 00.140909
USER MANUAL
PDCI-24V PROGRAMMABLE CDI IGNITION AND PV CONTROLLER
TECHNICAL DATA
Limit values:
- minimum revs
200 RPM
- maximum revs
20000 RPM
- minimum supply voltage
7 Volts
- recommended power supply
12÷15 Volts
- maximum supply voltage
17 Volts
- stand-by current draw
< 0.09 Amp
- current draw at 1300 RPM
< 0.3 Amp
- current draw at 12000 RPM
< 1.7 Amp
- maximum continuous current for shift light and power jet output
1 Amp
- peak current for shift light and power jet output
5 Amp
- constant spark energy from idle to 13000 RPM
>35mJ
Important!
Avoid reverse power supply connection...circuit can handle reverse power supply only for short time.
Features:
- fast power-up (also starts only with condenser)
- full power starting spark energy already at 7Volts power supply
- one isolated input (pickup)
- two independent ignition coil outputs
- individual advance/retard of each output
- store and load function for two ignition maps
- external switch for changing ignition map while riding
- TPS input (Throttle Position Sensor)
- shift light output
- 2 power jet outputs
- duty cycle solenoid output (for regulating A/F ratio on some carburettors)
- quick shift (shift kill)
- soft rev limit (three stage rev limit)
- reduced spark at high revs with closed throttle (TCT mode)
- tachometer output
- easy and fast programming on the field, via hand held programmer
- programming while machine running - you can immediately see effects
- each curve can be set in 4 to 12 curve points
