5-116
CELL-DYN
3000 System Operator’s Manual
9140240E — May 1995
Operating Instructions Chapter 5
Customizing the Printout
The
CUSTOMIZE PRINTOUT FOR DATA LOG Screen
) shows the group of parameters that will be printed on a Data
Log printout. A list of the available parameters is displayed under the
group. The parameters are selected from the list and placed in the desired
position to customize the printout. In addition to the usual Hematologic
parameters, the following parameters may also be printed in the Data
Log:
UMT1 and UMT2 — UMT1 is the RBC/PLT Upper Metering
Time. UMT2 is the RBC/PLT Upper
Metering Time for an extended count.
CNT1 and CNT2 — CNT1 is the RBC/PLT Count Time.
CNT2 is the RBC/PLT Count Time for
an extended count.
Procedure Customize Data Log Printout
1.
, press [CUSTOMIZE DATA
LOG] followed by [CUSTOMIZE PRINTOUT].
2.
Use the Arrow keys on the keyboard to move the cursor to the
desired parameter in the list displayed under the printout group.
3.
Press [SELECT PARAMETER]. The selected parameter is
highlighted and the cursor moves to the first position in the group.
NOTE: The key label changes to [PLACE PARAMETER]
and a [CANCEL SELECTION] key is displayed.
4.
If necessary, use the Arrow keys on the keyboard to move the
cursor to the desired location and press [PLACE PARAMETER].
NOTE: When the [PLACE PARAMETER] key is pressed, the
selected parameter is displayed in the position indicated by the
cursor and the cursor then advances to the next parameter in the
list displayed under the printout group.
5.
Repeat steps 2–4 until all selections have been made.
6.
If desired, press the Print Screen key on the keyboard to obtain a
printout of the configuration.
7.
Press [RETURN] twice to return to the
Search
Go Back
Book TOC
