CELL-DYN
3000 System Operator’s Manual
5-97
9140240E — May 1995
Chapter 5 Operating Instructions
4.
Type the appropriate sample identification information in the
<SPECIMEN ID> and <SPECIMEN NAME> (if selected) entry
fields on the Work List. Press the Enter key on the keyboard to save
the entry in each field and advance the cursor.
5.
If selected, type the appropriate information in the <LIMIT> and
<PARAM> entry fields. Press the Enter key on the keyboard to
save the entry in each field and advance the cursor.
NOTE: If no entries are made in these fields, the default
selections are used.
6.
After the information for the sample is entered, place the sample in
a rack or on a mixer. Subsequent samples should be placed in the
rack or on the mixer in the order in which the information is
entered into the Work List.
7.
When all entries have been made, press [RETURN] to return to the
8.
Press [SPECIMEN TYPE] followed by [PATIENT].
9.
If necessary, press [CHANGE SAMPLER] to select the desired
mode.
10.
Type the sample ID number in the <NEXT ID> entry field on the
. Press the Enter key on the keyboard to
save the number. The corresponding Work List information for that
ID number will be displayed in the appropriate fields.
11.
Run the well-mixed sample in the desired mode.
NOTE: Samples may be run in any order as long as the sample
ID number is entered in the <NEXT ID> entry field before the
sample is run. Modifications to the Work List should be made
only when the Data Station is in the READY state.
Search
Go Back
Book TOC
