ABB CRB 15000, Product Manual, Page: 498 / 1096

Note Action
Hex socket head cap screw: M3x8
12.9 Lafre 2C2B/FC6.9 (8 pcs) Refit the bottom cover with the attachment screws.
Note
For CRB 15000-5/0.95, fit the cover in correct dir-
ection, the protrusion of the cover must face out-
wards.
2
Tightening torque: 1.2 Nm.
xx2000002007
xx2100000268
Lifting and securing the robot (-5/0.95)
Note Action
CAUTION
The CRB 15000 robot weighs 28 kg. A minim-
um of two persons are required for lifting as
well as securing the robot in order to avoid any
damage, instability, and injury.
1
Special consideration is necessary when
mounting the robot in an elevated, suspended
or wall mounted position.
xx2100000118
Grasp the robot at the foot and elbow, as
shown in the figure, and lift it up from the
transportation package. 2
Carry the robot to the installation site.
CAUTION
Do not leave the robot standing unfastened to
the foundation, it is not stable on its own.
3
Centering pins: DIN6325, hardened
steel Ø6x24 mm, 2 pcs . Fit two pins to the holes in the base. 4
Continues on next page
498 Product manual - CRB 15000
3HAC077389-001 Revision: L
© Copyright 2021 - 2023 ABB. All rights reserved.
5 Repair
5.3.9 Replacing the brake release unit
Continued