ABB CRB 15000 Product Manual Download Page 469

Page: 469 / 1096

Removing the axis-6 joint unit

Note

Action

Lifting aid: 3HAC077789-001

Fit the lifting aid to the joint unit, on the torque
sensor side.

CAUTION

The connectors and the joint unit cables are
sensitive to mechanical damage. Handle the as-
sembly with care.

Screws: M3x12 (4 pcs)

xx2000002168

Position shown in the figure shows
axis 5 jogged to +20°, which is a
more convenient position when re-
placing only the axis-6 joint unit.

xx2000002170

Remove two attachment screws.
Dispose the screws.
New screws are included in the spare part delivery
of the joint unit.

Position shown in the figure shows
axis 5 jogged to +20°, which is a
more convenient position when re-
placing only the axis-6 joint unit.

Guide pin, M3x110: 3HAC077787-
001

Fit two guide pins to the axis-6 joint unit.

Always use guide pins in pairs.
For joint units on axes 4, 5 and 6.

xx2100000328

Continues on next page

Product manual - CRB 15000

469

3HAC077389-001 Revision: L

5 Repair

5.3.7 Replacing the axis-6 cabling

Continued

Summary of Contents for CRB 15000







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CRB 15000

Reviews:

ABB CRB 15000, Product Manual, Page: 469 / 1096

Search results

Summary of Contents for CRB 15000

Reviews: